We If you want any data or samples, make sure you speak to us and you will have our soon reply.- EPG Team the biggest agricultural gearbox and pto manufacturing facility in China with 5 distinct branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Extrusion Line for Making Drainage H2o Source PP-R PE Pipe (sixteen-1200mm)
HDPE Pipe Software:
Agricultural Irrigation drinking water supply&Sweage drainage pipe&Discharge system&Fuel supplly program&Architectural drinking water source.
Production Flow of Pipe Production Line:
Material →Color Mixer →Automatic Feeder→Hopper Dryer →Single Screw Extruder →Extrusion Mould & Calibrator → Vacuum Calibration Cooling Tank → Spray Cooling Tank →Printer → Haul-off Unit →Cutter →Stacker or Coiler
Characteristics of Pipe Machiner:
one- 30m/min of optimum lineal extrusion velocity, big potential and reduced power use, and achieved multi- layers co extrusion with 1-5 levels.
two- The copper bush is far more dress in-resisting and avoid content leakage which can guarantee a steady operating of extruder.
3- Content feed through spiral groove, successful transmission and can efficiently minimize back again-pressure on extruder.
4- Special design (barrier, shearing and mixing zone) assures a uniformed plasticizing result, and can reduce the pressure on the screw which assures a substantial velocity and secure output capacity.
five- Large torque gear box has a intelligent figuration, compact development, minimal noise, higher carrying capability, high transmission efficiency can assure prolonged-time difficulty-free of charge procedure
6- PCA(pipe air cooling system) of die head largely increase the extrusion pace and decrease the cooling length of extrusion line, and improve high quality of internal pipe surface
seven- Intelligent PLC managing system with human-pleasant interface make the procedure very easily and conveniently
8- Chip-free cutter ensuing flat and clean cutting surface of pipe.
Main Technical Parameter:
| Machine model |
Pipe diameter | Vacuum Calibration Tank | Spray Cooling Tank | Haul-off unit | cutter | ||||
| Vacuum pump | Water pump |
Length(mm) | Drinking water pump |
Duration(mm) | caterpillar Quantity | Motor | Cutting type | ||
| HDPE63 | φ16mm-φ63mm | 3kw*2 | 3kw*2 | 6000mm | 3kw*1 | 6000mm | two | 1.5kw*2 | No dust cutter |
| HDPE-a hundred and ten | Φ40mm-φ110mm | 4kw*2 | 3kw*2 | 6000mm | 3kw*1 | 6000mm | 2 | 3kw | No dust cutter |
| HDPE-160 | Φ50mm-φ110mm | 4kw*two | 4kw*two | 6000mm | 4kw*1 | 6000mm | 3 | 1.1*three | Planetary cutter |
| HDPE-250 | Φ75mm-φ250mm | 5.5kw*two | five.5kw*2 | 6000mm | 4kw*1 | 6000mm | 3 | one.1kw*three | Planetary cutter |
| HDPE-315 | Φ110mm-φ315mm | 5.5kw*2 | five.5kw*two | 6000mm | five.5kw*one | 6000mm | four | one.1kw*four | Planetary cutter |
| HDPE-630 | Φ315mm-φ630mm | seven.5kw*two | 7.5kw*2 | 6000mm | seven.5kw*1 | 6000mm | six | 1.1kw*six | Planetary cutter |
| HDPE-800 | Φ400mm-φ800mm | 5.5kw*2(2m) | five.5kw*2(2m) | 6000mm | 5.5kw*2 | 6000mm | 8 | 1.1kw*eight | Planetary cutter |
| 7.5kw*2(10m) | seven.5kw*2(10m) | ||||||||
| HDPE-1200 | Φ630mm-φ1200mm | 5.5kw*two | 7.5kw*2 | 6000mm | seven.5kw*two | 6000mm | 10 | 1.1kw*10 | Planetary cutter |
Machine image:
Extrusion equipment
Vacuum Calibration Cooling tank & Spray Cooling tank
Haul-off Unit
Planetary Car-Cutter
Plastic Pipe Stacker
If you have any queries, remember to get in touch with us:
Mob/Watsap/Wchat:+86-18915692496
The use of first products manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our company and the detailed alternative components contained herein are not sponsored, accepted, or manufactured by the OEM.
