We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
1. HS series slurry pump is made for the steady pumping of substantial abrasive, higher density slurries with nominal maintenance needs. The wearing areas are created of ultra chrome or and rubber. It will sustain large performance above the put on lifestyle of its elements.
2. The metallic soaked parts and rubber ones can be interchangeable for dealing with different liquids or slurries.
3. HS slurry pumps are obtainable in measurements ranging from 1 inch to eighteen inch discharge and feature higher effectiveness performance capable of stream costs from ten.8 to 5400 m³/h and heads up to 125 meters for high head versions.
Characteristics:
1. Cylindrical composition of bearing assembly: convenient to adju EPT the area among impeller and EPT liner
and can beremoved comple tel: +86~thirteen 0571 88828y
two. Interchangeable anti-abrasive wet areas made of large-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs provide substantial running pressure capabilities
and an further measure of protection.
four. The discharge branch can be oriented to any 8 positions at the interval of 45 degrees
5. Various drive kinds: DC(direct relationship), V-belt travel, equipment box reducer, hydraulic couplings, VFD,
S EPT management, and so forth
six. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Typical Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Development |
| • Alumina Market | • Energy Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Electricity (Kw) |
Inlet & Outlet size (inch) | Material for Dress in Areas | Circulation Price (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/1 | M | twelve.6~28.eight | 3.5~eight | six~68 | 1200~3800 | 152 |
| R | 10.8~25.two | three~seven | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.five | M | 32.4~72 | 9~20 | 6~fifty eight | 1200~3200 | 184 |
| R | 25.2~fifty four | 7~15 | 5.5~41 | one thousand~2600 | 178 | |||
| 50HS-C | 30 | three/two | M | 39.6~86.4 | eleven~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~75.six | ten~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | four/three | M | 86.4~198 | 24~55 | 9~52 | one thousand~2200 | 245 |
| R | 79.2~a hundred and eighty | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40~a hundred | 12~fifty six | 800~1550 | 365 |
| R | a hundred and forty four~324 | 40~ninety | twelve~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/six | M | 360~828 | a hundred~230 | ten~sixty one | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | 7~49 | 400~1000 | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/eight | M | 612~1368 | one hundred seventy~380 | eleven~sixty one | four hundred~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | seven~sixty eight | 300~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | thirteen~sixty three | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | 13~forty four | three hundred~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | 200~400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | 16.2~34.2 | 4.5~9.5 | twenty five~ninety two | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/2 | M | sixty eight.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | four/3 | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/4 | M | 324~720 | 90~two hundred | thirty~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | twenty~94 | five hundred~1000 | 711 |
For the materials of wearing areas,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to get in touch with us any time for information.
Your inquiry will get our prompt focus and reaction !
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first tools manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our business and the detailed substitution components contained herein are not sponsored, approved, or made by the OEM.
